Target 0
Unit 0 Disk SEAGATE ST32550W SUN2.1G .......
Target 1
Unit 0 Removable Disk HP C1113 F
Fig. 3 Targets on the SCSI bus
•
Remove the frame that covers the disk drive. Push a screwdriver in the opening on the
left side of the frame (refer to Fig. 4).
•
Push the plastic latch right of the disk support (refer to Fig. 5).
•
Swing the plastic latch to the left and slide the disk drive support and disk drive outward
on the guide rails and remove it from the box.
Siemens-Elema AB
Solna, Sweden
Copyright (c) 1996 Seagate
All rights reserved ASA 2
4XMO
Register 5
SPB7-230.061.02
Rev. 02
1.36
Page 3 of 10
05.99
SPS-UD
MAMMOMAT 3000 Opdima
Service
3
3