Read these instructions completely prior to beginning the replacement.
Follow all procedures for removing and installing the keyboard.
Follow C-MOS guidelines as required.
Always replace the entire keyboard. Replacement of parts is not permitted.
Follow all general safety guidelines.
Note the special safety guidelines indicated in these instructions.
The entire system should be switched off when parts are being replaced.
Fig. 4
Back of the box (without D100).
CAUTION
•
Remove the keyboard connector in back of the box.
Siemens-Elema AB
Solna, Sweden
Register 5
SPB7-230.061.02
Rev. 02 05.99
Keyboard Interface
Page 3 of 6
MAMMOMAT 3000 Opdima
SPS-UD
5
5
5
5
Service