Table of Contents
Advertisement
Function control knob
The function control knob is used to select the type of heating.
Setting
Zero setting
Û
Rapid heating
I
3D hot air*
:
Eco hot air function*
'
Top and bottom heat-
%
ing*
Pizza function
;
Grill with hot air
4
Large surface grill
(
Grill, small surface
*
area
Bottom heating
$
Self-cleaning
x
Light
\
* Type of heating used to determine the appliance's energy effi-
ciency rating according to EN60350.
When a heating type is selected, the
on the display panel.
Use
The oven is off.
The oven reaches the pro-
grammed temperature very
quickly.
For cakes and pastries. You can
bake cakes and pastries on three
levels. A fan located on the rear
wall of the oven disperses the heat
evenly.
To prepare cakes, confectionery,
deep frozen products, roasts and
fish on one level and when pre-
heating is not required. The fan
distributes air evenly inside the
oven to optimise energy use.
For cakes, gratin dishes, and lean
meat roasts, e.g. veal or game, on
one level. The heat is provided by
the bottom and top heating ele-
ments.
Quick preparation of frozen foods
without pre-heating, e.g., pizza,
chips or puff pastries. The heat
comes from the bottom element
and the fan on the rear wall.
For roasting joints of meat, poultry
and fish. The grill heating element
and the fan switch on and off alter-
nately. The fan circulates the heat
generated by the grill around the
food.
For grilling steaks, sausages, fish
and toasting bread. The entire sur-
face below the grill heating ele-
ment is heated.
For grilling a small number of
steaks or sausages or small
amounts of fish, and toasting
bread. Only the central area of the
grill heating element heats up.
Confits, baking and cooking au
gratin. The heat comes from the
bottom heating element.
Using the self-cleaning function to
clean the inside of the oven. The
oven heats to clean itself.
For turning on the oven light.
AA
symbol is displayed
Sensors and display panel
The sensors are used to set different functions. The set values
are shown on the display panel.
Sensor
ºC
Temperature
Time functions
0
Minus
A
Plus
@
The symbol for the time function activated lights up on the
display panel.
Sensors to change the set values
With the
@
or
A
sensors, all fixed and recommended settings
can be changed.
= Increase programmed values.
@
= Reduce programmed values.
A
Ranges
30-270 Temperature
range
1-3
Grill power
Cleaning levels
1 sec. - 23:59 h.
1 sec. - 23:59 h.
Heating symbol
While the oven is heating up, the
display panel. When the oven is ready for your dish and
maintains its temperature the
The
symbol never lights up for grill power and cleaning levels.
s
Inside the oven
There is a light inside the oven. A fan prevents the oven from
overheating.
Light
The oven light remains on while the oven is working. The light
switches off at set temperatures of less than 60ºC and during
the clean function. This ensures optimum precision control.
However, the light can be turned on without the oven being on
by setting the function control knob to
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.
Sensor function
Select the temperature and grill
power or cleaning level.
Select the timer
, the cooking
V
time
x
, the end time
y
time
.
0
Reduce programmed values.
Increase programmed values.
The temperature inside the oven in
ºC.
The power levels of the small sur-
face grill
*
and large surface
grill
.
(
1 = level 1, low
2 = level 2, medium
3 = level 3, high
Self-cleaning levels
.
x
1 = level 1, low
2 = level 2, medium
3 = level 3, high
Cooking time.
Time set on the timer.
s
symbol will be lit up on the
s
symbol will switch off.
.
\
and the
5
Advertisement
Table of Contents
