AEG LFR9514L6U User Manual page 34

3. Press and hold the Remote Start
button for a few seconds until a 'click'
sounds. Release the button.
on the display for 5 seconds and the
indicator starts blinking.
The wireless module begins starting up.
Make sure that you APP is ready for
connection.
4. After about 10 seconds,
Point) appears on the display.
The access point will be open for about 3
minutes.
5. Configure the My AEG Care app on your
smart device and follow the instructions to
connect the appliance to your Wi-Fi
network.
6. If the connectivity is configured, when the
programme information screen returns,
the indicator
34 ENGLISH
appears
(Access
is on the display.
Every time you switch the appliance on,
the appliance takes about 10 seconds to
connect to the network automatically.
When the indicator
connection is ready.
To switch the wireless connection off,
press and hold the Remote Start
for a few seconds until the first acoustic
signal. Release the button.
the display for 5 seconds.
If you switch the appliance off and on
again, the wireless connection is
automatically off.
To remove the wireless credentials, press
and hold the Remote Start
seconds until the second acoustic signal:
appears on the display for a few
seconds.
12.4 Remote Start
The Remote Start enables you to start a cycle
in remote control.
The Remote Control activates
automatically when you press the Start/
Pause button to start the programme,
but it is also possible to start a washing
programme remotely. This function is
deactivated when door is open.
When the App is installed and the wireless
connection is complete, you can activate the
Remote Start:
1. Touch the Remote Start
the indicator
for a few seconds.
stops blinking the
button
appears on
button for a few
button and
blinks on the display