Settings - AEG LFR9514L6U User Manual

more water for some washing
programmes
The appliance empties the water out
automatically after approximately 18
hours.
7.14 Temperature
When you select a washing programme, the
appliance automatically proposes a default
temperature.

8. SETTINGS

8.1 Introduction
When pressing a key combination, do
not tilt your fingers downwards . The
sensors of the underneath buttons are
sensitive and may interfere with Your
choice.
8.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special short
tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed (sequence
of sounds for about 2 minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
• When a laundry overload is detected
during ProSense phase (a double sound
played one).
To activate/deactivate this option, hold down
the Extra Rinse button until a beep or a
double beep sounds.
22 ENGLISH
Touch this button repeatedly until the desired
temperature value appears on the display.
When the display shows the indicators
and , the appliance does not heat the
water.
If you deactivate this function, the
acoustic signals stops playing at the end
of the programme only.
8.3 Child Lock
With this option you can prevent children from
playing with the control panel.
To activate/deactivate this option, hold down
the Stains/Prewash button until
on/goes off on the display.
The appliance will default to this option after
you switch it off.
8.4 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing the
On/Off button.
2. Press and hold the Extra Rinse and Plus
Steam buttons for some seconds.
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
comes