Dial And Buttons - AEG LFR9514L6U User Manual

7. DIAL AND BUTTONS

7.1 On/Off
Pressing this button for a few seconds allows
to activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease the
energy consumption in a few cases, you may
need to activate the appliance again.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
7.2 Programme dial
By rotating the programme dial it is possible
to select the desired programme.
7.3 Favourite programmes
These selector positions are available after
the appliance have been connected to Wi-Fi.
The favourite programmes can be set and
saved via App only choosing from the
available ones which are divided into the
three categories indicated on the control
panel.
Once the favourite programmes have been
set, you can select one of them via App or by
turning the programme dial to relevant
position: the relevant led comes on and the
information on the display are updated
accordingly.
The favourite programmes can be
cancelled through the related App
command or pressing the Factory Default
key combination.
7.4 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
7.5 Plus (+) and Minus (-) touch
buttons linked to Finish In option
These buttons allow increasing (+) and
decreasing (-) the time of cycle end.
7.6 Remote start
A quick touch of this button activates the
Remote Start function that allows you to start,
pause and stop the appliance remotely.
The related led comes on and the related
icon appears on display.
If you set a programme via App and it
does not match with the knob position,
text appears alternating with
programme duration.
Press and hold this button for longer time to
provide two other functions:
• hold it down for 3 seconds as long as a
click sounds: the Wi-Fi is turned on and
off.
• hold it down for 10 seconds as long as a
double beep sounds and
the display: to reset the Network
Credentials.
appears on
ENGLISH 19