Table of Contents
Advertisement
Levels
Water hardness range
°f
(French de‐
grees)
C02
C03
1)
C04
C05
C06
C07
1)
Factory setting, able to satisfy most of the use conditions.
10.3 Pouring salt
The water softener function acts through
special resins present in the appliance.
To regenerate the resins and make them
ready to soften the water pour a special salt
in the compartment
1. Open the detergent dispenser.
2. Open the compartment
°d
(German de‐
grees)
6 - 13
4 - 7
14 - 21
8 - 11
22 - 29
12 - 16
30 - 37
17 - 20
38 - 45
21 -25
≥46
≥26
Salt
:
Salt
.
°e
(English de‐
mmol/l
grees)
5 - 9
0.6 - 1.3
10 -15
1.4 - 2.1
16 - 20
2.2 - 2.9
21 - 26
3.0 - 3.7
27 - 32
3.8 - 4.5
≥33
3. Pour the special salt.
4. Close the salt compartment and the
detergent dispenser.
Regularly check if there is enough salt.
The compartment
gr of salt that are sufficient for about two
months if the default water hardness level
(C04) is set and the water softener is
activated during wash phase only. A different
water hardness level or different setting may
increase or decrease the salt consumption.
Refer to 'How to set the water hardness level'
and 'How to set the water softener also during
rinse phase'.
The display shows the indicator
Salt
compartment
needs to be refilled with salt,
even if a little salt still remains.
ppm
60 - 130
140 - 210
220 - 290
300 - 370
380 - 450
≥4.6
≥460
Salt
can contain about 600
when
ENGLISH
25
Advertisement
Table of Contents
