ZEUS4
Additional output settings - Setting are used to link onboard actions with the outputs if needed:
•
Input 1 activate output: Alarm input event on the input will activate output defined under
this section.
•
Input 2 activate output: Alarm input event on the input will activate output defined under
this section.
•
Input 3 activate output: Alarm input event on the input will activate output defined under
this section.
•
Input 4 activate output: Alarm input event on the input will activate output defined under
this section.
•
GSM network error: Trouble with GSM module or lack of GSM network coverage will
activate output defined under this section.
•
System tamper: Tamper activation will activate output defined under this section.
•
System ARM/DISARM: Activation/deactivation of ARM/DISARM input will activate
/deactivate output defined under this section.
•
Unauthorized call or SMS received: If unauthorized call or SMS is received on the unit
this event will activate output defined under this section.
•
Listen in indication: When listen in function is active output defined under this section gets
activated.
•
CID error indication: When CID function is errored, output defined under this section gets
activated.
NOTE
Do to limitation of the outputs use additional outputs settings with care.
NOTE
ZEUS4-VD LITE and ZEUS4-MC LITE has only 2 outputs.
Page 17
USER MANUAL