Table of Contents
Advertisement
ZEUS4
8.4 CALLER ID ACCESS
Caller ID access is a very simple way to control relay output defined in Caller ID output setting.
User will by calling in the ZEUS4 unit trigger defined output.
Settings for this function are found in the Caller id # tab.
General settings:
• Caller ID security mode: User can select between 3 options:
Caller ID Disabled deactivates caller ID function – all numbers are restricted.
Caller ID for specific users will limit the caller ID function only to the numbers on the list.
Caller ID always ON will allow all users that know the number of the unit to open defined
output. In last option the user doesn't need to be on the list to trigger the output.
• Caller ID output: Selecting the output that will be triggered in Caller ID function.
Selection Caller ID always ON will allow anybody with the knowledge of the
NOTE
unit number to trigger the output by calling the unit. Use this setting with
caution.
Figure 8: WEB Server-Caller ID Access
Page 15
USER MANUAL
Advertisement
Table of Contents
