Hyundai ix20 Owner's Manual page 365

Hide thumbs Also See for ix20:

1. Remove the light assembly from the

vehicle by pushing the lens forward

and pulling the assembly out.

2. Disconnect the bulb electrical connec-

3. Separate the socket and the lens parts

by turning the socket counter clock-

wise until the tabs on the socket align

with the slots on the lens part.

4. Remove the bulb by pulling it straight

5. Insert a new bulb in the socket.

6. Reassemble the socket and the lens

7. Connect the bulb electrical connector.

8. Reinstall the light assembly to the

body of the vehicle.

Rear combination light bulb

(1) Stop and tail light

(2) Rear turn signal light

(3) Back-up light

(4) Tail light

(5) Rear fog light

1. Open the tailgate.

2-1. Loosen the outside light assembly

retaining screws with a cross-tip

screwdriver.

2-2. Remove the rear combination light

assembly from the body of the vehi-