Advertisement
■
Phone Setup
®
All Bluetooth
related operations can be
performed by voice command or by man-
ual operation.
- By Voice Command:
Press
button on the steering wheel
to activate voice recognition.
- By Manual Operation:
1) Push the "SETUP" button to enter
SETUP mode.
2) Select "PHONE" item by rotating the
TUNE knob, then push the knob.
3) Select desired item by rotating the
TUNE knob, then push the knob.
• Pairing phone
®
Before using Bluetooth
features, the
phone must be paired (registered) to the
audio system. Up to 5 phones can be
paired with the system.
NOTE:
The pairing procedure of the phone
varies according to each phone
model. Before attempting to pair
phone, please see your phone's
User's Guide for instructions.
Features of your vehicle
NOTE:
Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone is
deleted manually from the audio sys-
tem (refer "Deleting Phone" section)
or
the
vehicle's
information
removed from the phone.
1. Press
button.
2. Say "Set Up".
- The system replies with available
commands.
- To skip the information message,
press
again and then a beep is
heard.
3. Say "Pair Phone"
4. Proceed at next step.
5. Say the name of your phone when
prompted.
- Use any name to uniquely describe
your phone.
- Use Full name to voice tag.
- Not use to short name or similar to
voice command.
®
6. Bluetooth
system will repeat the
name you stated.
7. Say "Yes" to confirm.
is
4 135
Advertisement
