Advertisement
Features of your vehicle
8. The audio displays "searching ----
passkey: 0000" and asks you to initiate
pairing procedure from the phone.
®
9. Search the Bluetooth
system on your
phone .Your phone should display your
[vehicle
model
name]
®
Bluetooth
device list. Then attempt
pairing on your phone.
10. After Pairing is completed, your
phone
will
start
phone/contact list to the audio sys-
tem.
- This process may take from a few
minutes to over 10 minutes depend-
ing on the phone model and number
of entries in the phone/contact list.
11. By manual operation:
- Select "PAIR" in PHONE menu, then
proceed from step 5.
4
136
NOTE:
• Until the audio displays "Transfer
Complete", Bluetooth
feature may not be fully operational.
• Depending on the phone make and
on
the
model, the phone book contact list
mat not transfer to the audio system.
NOTE:
to
transfer
If the phone is paired to two or more
vehicles of the same model, i.e. both
vehicles are ix20, some phones may
not handle Bluetooth
name correctly. In this case, you may
need to change the name displayed
on your phone from ix20 to ix20A and
ix20B.
Refer to your phone's User's Guide, or
contact your mobile carrier or phone
manufacturer for instructions.
• Connecting phone
When the Bluetooth
the phone previously used is automati-
®
hands-free
cally selected and re-connected. If you
want to select different phone previously
paired, the phone can be selected
through "Select Phone" menu.
Only a selected phone can be used with
the hands-free system at a time.
1. Press
2. Say "Set Up".
3. Say "Select Phone" after prompt
®
devices of that
- The system lists all the registered
phone names.
4. Say the name or number of desired
phone from the list.
5. Say "Yes" to confirm.
6. By manual operation:
- Select "SELECT" in PHONE menu,
then select desired phone from the
list.
®
system is enabled,
button.
Advertisement
