EVSEMaster
EVSE Master APP User Manual
4.18 "System se�ngs-Firmware upgrade" Page
The firmware upgrade page displays the
current firmware version and the latest
firmware version of the charging sta�on.
If the current firmware is not the latest
version, the user will be prompted to
upgrade.
When upgrading, you should make sure
that the phone is on the upgrade page,
the ba�ery of the phone is not less than
50%, the charging sta�on cannot be
powered off, and the distance between
the phone and the charging sta�on is no
more than 10 meters.
Figure 31 Firmware version is the latest version page
Figure 32 The firmware version can be upgraded page
There are two channels to upgrade data:
Wi-Fi and Bluetooth. It takes about 5
minutes to upgrade under the Wi-Fi
channel, while approximately 30
minutes under the Bluetooth channel. It
is recommended to use the Wi-Fi
channel to upgrade.
Figure 33 Firmware upgrade under Bluetooth channel page
Figure 34 Firmware upgrade under Wi-Fi channel page
20