Advertisement
4. Attach panel to product
When refitting the door pins, ensure they are orientated as shown.
5. Adjust panel height to align the cabinetry gaps
With the front panel fitted, insert an appropriately sized Philips screwdriver into the hole above the door pin and rotate
the panel up or down to align the gaps in your cabinetry. Repeat on the other side if necessary.
https://producthelp.fisherpaykel.com/au/Clean/DishDrawer%E2%84%A2/Integrated_Single/DD60SLI7/Installation_Guide_DD...
Updated: Tue, 11 Apr 2023 05:51:15 GMT
Powered by
4
Advertisement
