Table of Contents
Advertisement
CAUTION:
Assemble the cleaner before using.
CAUTION:
Moving parts, make sure on/off switch is in off (0) position before plugging in.
NOTE:
Features may vary by model yet all parts assemble the same.
Upper
Hose
Retainer
@
Hose
Lower
Hose
Retainer
From rear of cleaner, align handle with groove and
@B) Pick up hose and lay across upper hose retainer.
slide onto cleaner. if necessary, use thumb and finger
pressure to slide handle into position.
@) Push the end of the hose in the lower hose retainer
to secure.
@) Attach handle with two 1 inch screws provided in
the assembly
packet.
Use
a Phillips® head
screwdriver.
NOTE:
Hand tighten with screwdriver to be sure
both screws are firmly seated.
Advertisement
Table of Contents
