Advertisement
KR-V77R
CONTROLS AND INDICATORS
@ VIDEO deck operation
Listening to video recorder audio sound
1. Press the appropriate VIDEO (1, 2) key of the INPUT
SELECTOR
to select output from
a video
recorder
connected to the VIDEO (1, 2) jacks.
2. Operate the video recorder.
:
3. Adjust the VOLUME controls for your preference.
4. When
4 video
monitor
is connected
to the VIDEO
MONITOR OUT jack on the rear panel, the picture from
the recorder can also be monitored.
Dubbing between two VCRs
Video dubbing can be performed while listening to any
desired source.
With this set, through dubbing from
to
is possible.
To operate, set the
video deck to record-pause
mode and set the
video deck to playback mode.
At the same time as the
video deck starts to play,
the record-pause mode of the
video deck is
released and recording starts.
Audio injection
During video dubbing. the sound from the VCR can be
replaced with the desired audio source without affecting
the picture.
At this. graphic equalizer can be applied to the recording
' audio source.
1. Press the AUDIO
INJECTION switch so that the '"AU-
DIO INJECTION" display is illuminated.
2. Select the desired audio source for Audio injection with
the INPUT SELECTOR.
3. When equalizer compensation is required when record-
ing a desired audio source with audio injection ON,
press the EQ.REC key.
The
indicator fights up.
Set the equalizer controls as desired.
. Operate each VCR for dubbing.
-$@@e
AUDIO INJECTION
@ Graphic equalizer operation
Normal operation
1. Select the desired source.
2. Press the equalizer (EQ. ON) key to ON.
@ The
ON indicator lights up in the display window.
3. Press the equalizer level control UP DOWN keys so that
the equalized
sound
is heard
from
the speakers
as
desired.
Preset procedure
Use EQ PRESET key to store equalizer curves in memory
or to recall them. (Five different equalizer curves can be
stored.)
. Select the desired source.
. Press the equalizer (EQ. ON) key to ON.
. Set the your desired equalizer curve.
. Press the MEMORY
(EQ) key.
. Press the desired EQ PRESET keys (M-A
~~ M-E) to store
the equalizer curve.
ahon-—
'Preset operation
The preset memory of this unit is available in two types the
"PGM" memory in which the user-created desired sound
response can be preset, and the "SET" memory in which
the factory-preset sound equalizer curves are prepared.
Use them by referring to 'Characteristics of the SET preset
memories".
1. Select SET or PGM.
@ The previously selected equalizer curve of the preset
channel is displayed.
2. Select preset key
Characteristics of the "SET" preset memories
A: For solid and punchy sound.
B: For effective reproduction of the dynamic
movie
sound.
C: For easy to listen background music.
: For musical sound reproduction in a sense of lively
For reproducing the vocal music realistically.
EQ REC switch
Press
this switch,
signals
will allow
equalized
to. be
recorded on TAPE 1. If you wish to record non-equalized
signals with the equalizer switch in the ON position, turn
the equalizer recording switch to OFF. This will allow you
to hear the equalized signals while recording non-equalized
signals.
Note:
The equalized signal is not output at TAPE 2 REC jacks.
Advertisement
