Advertisement
WN
=
CONTROLS AND INDICATORS
Listening to a preset station
. Press the preset
function
key to select
"1-10"
or
"11-20".
. Press a numeric
key under which
memory
has been
preset.
. Adjust the VOLUME
control to the required listening
level and use the graphic equalizer control to adjust the
sound to your own
preference.
Listening to record playing
. Press
the
PHONO
key
of the
INPUT
SELECTOR
switches.
. Operate the turntable to play back a record.
. Adjust the VOLUME
control to the required listening
fevel and use the graphic equalizer control to adjust the
sound to your own preference.
With a turntable that is connected to this unit with a
System Control cord, the convenient System Control
operations are available. For details on this, refer to
"System Control Operation' on page 20.
Listening to the program source connected to
the CD or AUX jacks
. Press the CD or AUX key of the input selector switches.
. Operate the component connected to the CD or AUX
jacks.
. Adjust the VOLUME
control to the required listening
level and use the graphic equalizer controls to adjust
the sound to your own preference.
With a CD-player that is connected to this unit with a-
System Control cord, the convenient System Contro
operations are available.
For details on this, refer to
"System Control Operation' on page 20.
@ Tape deck operation
1. Press the appropriate TAPE key of the input selector
switches (1 or 2) to select output from a tape deck
connected to the TAPE
1 or 2 jacks.
2. Operate the tape deck.
3. Adjust the VOLUME
control to the required listening
level and use the graphic equalizer controls to adjust
the sound to your own preference.
@ With a tape deck (connected to the TAPE
1 jacks) that
is connected to this unit with a System Control cord.
the convenient System Control operations are available.
For details on this, refer to "System Control Operation"
on page 20.
Note:
——_—__————
When both key (TAPE-1 and TAPE-2) are pressed, TAPE-2 setting
has priority.
Recording
1. Press the appropriate
key of the INPUT. SELECTOR
switches.
'2. Set up your tape deck(s) for recording
and set the
recording level with the controls on your tape deck(s).
3. Adjust listening level at the unit to suit your listening
preference.
Note:
———________
eee
When a tape deck is connected to this unit with a System Control
cord, all of the input selector
switches
are disabled
during
recording and do not function until recording is finished. This will
prevent the recording from being interrupted.
Tape dubbing
Tape recordings may be duplicated (dubbed) easily using
two tape decks connected to the TAPE
1 and 2 jacks.
For example:
(TAPE 1 to 2):
1. Connect two tape decks to the TAPE
71 and TAPE
2
jacks
2. Press the TAPE
1 switch.
3. Play back the recorded tape and adjust the recording
levels before starting tape dubbing.
(TAPE 2 to 1):
1. Press the TAPE 2 switch.
2. Press a key except TAPE
1 of the INPUT SELECTOR
switches such as AUX.
3. Play back the recorded tape and adjust the eorcing
levels before starting tape dubbing.
4. Do not press the TAPE 1 switch during eerding with
tape deck 1.
Note: ———_———__——?SS
Adjust record levels on the deck that is making the eapy using that
deck's operating controls.
Advertisement
