Advertisement
KR-V77F
CONTROLS AND INDICATORS
@ Operations
1. Connect the power plug of this unit to an AC outlet.
@ This main frame enters the power standby mode and
the POWER STANDBY
indicator lights.
2. Press the POWER
key of remote
control unit or the
POWER switch of this unit.
This unit enters the power ON mode.
Operates with the keys of remote control unit.
e
3.
Note for remote control operation
After pressing one of operation keys, when the next operation
is required, press the next operation key firmly after approx.
1 second interval.
When the next operation key is pressed immediately after the
previous key, it may cause misoperation.
™@ Installing the battery on the remote control
unit
1. Remove the battery compartment cover.
2. Insert two size ""AA'
(R6) batteries
confirming
the
correct polarity and close the cover in its place.
Note:
The provided batteries are to be used for operation of the remote
control unit. and it may have shorter life. When the remote unit
becomes effective only for shorter distance on dose not effective
to operate, replace them with two new batteries.
@ Usable range of remote control unit
The usable range of the remote control unit may differ on
temperature, humidity or using conditions, however, it is
defined approximately as shown in the figure below:
For controlling audio
For controlling TV set
KMT-1026/KMT-2026S
11
Advertisement
