Advertisement
Introduction
What's in the box
BC82 Alarm Panel
What you'll need
● A working internet connection
● A smartphone or laptop
● A #2 Phillips screwdriver or
power drill with a #2 Phillips driver bit
● 1/4 inch (6.5mm) drill bit for wall anchors
● 1/8 inch (3mm) drill bit for pilot holes
● A shielded Cat5 or Cat6 Ethernet cable
with a .2''-.25" outside diameter (5-6.5mm)
3
Mount Plate
(Attached to alarm panel)
Connect
For easy registration and setup, scan
the QR code on the back of the
product.
If you prefer to manually register your
product, please proceed to:
verkada.com/start
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
T10 Security Torx Screwdriver
4 M4 x 25mm PH2 Wall
Screws, and Wall Anchors
All specifications are subject to change without notice
Copyright © 2022 Verkada Inc. All rights reserved.
Advertisement
