Siemens EH8P5262HK User Manual And Installation Instructions page 8

Built-in induction hob
Table of Contents

Advertisement

en Basic operation
5.4 Residual heat indicator
The hob has a residual heat indicator for each cooking
zone. This indicates that a cooking zone is still hot. Do
not touch the cooking zone immediately after switching
it off or while the residual heat indicator is lit.
Depending on the amount of residual heat, the
following is shown:
display: High temperature
¡
5.5 Technical Data
Product number
Product model
Appliance dimensions (WxDxH)
Cut-out dimensions (WxD)
Height above installation table
Panel
Net weight
Gross weight
Rated voltage
Rated frequency
Rated power input (Left)
Rated power input (Right)
Total rated power input
6  Basic operation
6.1 Switch on your hob.
Touch
a Audible sounds,
zone
lights up.
6.2 Switch off your hob.
Touch
indicator off,all cooking zones switch off.
a
a The residual heat indicator will remain lit until the
cooking zones have cooled down sufficiently.
Note: The hob is automatically switched off when all
the cooking zones have been switched off for a set
period of time.
If the hob is switched on again within 4 seconds after it
was switched off, the hob will start with the previously
stored settings.
8
EH8P5262HK
CS35-EH8P5262HK
780 x 450 x 65 mm
700 x 400 mm Rounded corners 4 x
R20 mm
5.5 mm
Black ceramic glass
10.5 kg
13 kg
220-240 V~
50/60 Hz
3100W (Heat setting 9: 1800W)
3100W (Heat setting 9: 1800W)
3500 W
indicator on, display of cooking
display: Low temperature
¡
If you remove the cookware from the cooking zone dur-
ing cooking, the residual heat indicator and the selec-
ted power level flash alternately.
If you switch off the cooking zone, the residual heat in-
dicator lights up. If the hob has been switched off, the
residual heat indicator remains lit for as long as the
cooking zone remains warm.
EH8P5263HK
CS28-EH8P5263HK
780 x 450 x 65 mm
700 x 400 mm Rounded corners 4 x
R20 mm
5.5 mm
Black ceramic glass
10.5 kg
13 kg
220-240 V~
50/60 Hz
2800W (Heat setting 9: 1800W)
2800W (Heat setting 9: 1800W)
2800 W
6.3 Select cooking zone and the required
power setting
Touch
or
to select a cooking zone.
1.
a Display of the corresponding cooking zone
up.
Touch setting area
2.
power setting.
Display
Each power level has an intermediate level .
Note: If no pan has been placed on the cooking zone,
the selected power level flashes. After a certain period
of time, the cooking zone automatic switches off.
6.4 Switch off the cooking zone.
Touch
or
to select a cooking zone.
1.
Touch the setting area
2.
ting to
.
a The cooking zone switches itself off and the residual
heat indicators light up.
lights
,select the required
Explanation
minimum power
maximum power
,set the power set-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh8p5263hk

Table of Contents