Table of Contents
Advertisement
¡ Do not kink or trap the power cable, or route it over
sharp edges.
¡ To remove the hob, the accessible power plug can
disconnect the induction hob from the power grid.
Disconnect the hob from the power supply, push
out the hob from below.
For EH8P5262HK:
¡ Make sure the electrical circuit, socket and fuse at
user's house complied with required 20A electrical
installation.
¡ Connect according to the connector diagram (see
figure) only. The earth wire (green and yellow)
should be connected first and disconnected last. It
should also be longer than the others, so that even
if the hob is moving the other wires can be discon-
nected before the earth wire.
¡ Do not kink or trap the power cable, or route it over
sharp edges.
¡ To remove the hob. Disconnect the hob from the
power supply, push out the hob from below. Discon-
nection from the grid can be realized by a touchable
power plug or by incorporating a switch in the fixed
wiring according to the wiring rules. The switch to
ensure that all poles of the induction hob are dis-
connected must be directly connected to the power
line terminal, and all poles must have an electric
shock distance, and can be completely disconnec-
ted under the condition of overvoltage category III.
Installation instructions en
17
Advertisement
Table of Contents
