Page 1
fixing device provided should fit most wall types, but please note For quicker assembly, we recommend the use of a power drill on a low-speed setting. that different wall materials may require different fixing devices from those supplied. mocka.co.nz I mocka.com.au I...
Page 2
Avoca Bedside Table mocka.co.nz I mocka.com.au I...
Page 3
6 x screws (E). Tighten with a screwdriver.Attach 4 x bolts (A) to panel [2],{3} as shown.Tighten with a screwdriver.Attach panels [6] and [7] together as shown and secure with 4 x nuts (B) and 4 x dowels (C). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 4
(B). Tighten with a screwdriver assembled frame and secure with 4 x nuts (B). Tighten with a screwdriver.Attach 1 x left rail (DL) and 1 x right rail (DR)as shown and secure with 4 x screws (E). mocka.co.nz I mocka.com.au I...
Page 5
Attach panels [2], [3] and [4] together as shown and secure with 4 x Attach assembled frames together as shown and secure with 8 x nuts screws (D) and 4 x dowels (C). Tighten with a screwdriver. (B). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 6
Avoca Bedside Table Slide panel [13] into position as shown. Attach panel (1) to assembled frame as shown and secure with 4 x dowels (C) and 6 nuts {B}. mocka.co.nz I mocka.com.au I...
Page 7
Avoca Bedside Table Attach 6 x braces (G) to assembled frame and secure with 6 x screws (F). Slide assembled drawers into position as shown. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 8
(K) and 1 x screw (H) . Tighten with a screwdriver . Fasten to the wall using 1x wall plug (L), 1 x screw (I) and 1 x washer (K).Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz I mocka.com.au I...
Need help?
Do you have a question about the Avoca and is the answer not in the manual?
Questions and answers