Download Print this page
Mocka Avoca Manual

Mocka Avoca Manual

Console table
Hide thumbs Also See for Avoca:

Advertisement

Quick Links

Avoca
Console Table
A
B
C
42 x
42 x
22 x
bolt
nut
dowel
G
H
I
8 x
2 x
2 x
bracket
clip
spacer
M
CL
CR
2 x
2 x
2 x
wall plug
slide
slide
HARDWARE SUPPLIED
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz I mocka.com.au I
D
E
F
14 x
24 x
8 x
screw
screw
screw
J
K
L
2 x
2 x
2 x
wall anchor
screw
screw
DL
DR
2 x
2 x
slide
slide
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from
those supplied.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Avoca and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mocka Avoca

  • Page 1 fixing device provided should fit most wall types, but please note For quicker assembly, we recommend the use of a power drill on a low-speed setting. that different wall materials may require different fixing devices from those supplied. mocka.co.nz I mocka.com.au I...
  • Page 2 Avoca Console Table mocka.co.nz I mocka.com.au I...
  • Page 3 Attach 22 x bolts to panel [2], [3], [8], [11]and [12] as shown. 4 x screws {E}. Tighten with a screwdriver. Attach 3 x bolts{A} and 2 x wall anhors{J} Tighten with a screwdriver. to panel {5}. secure with 2 x screws {K}。 Tighthen with a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 4 Attach 1 x left rails (CL) and 1 x right rails (CR) to panel [4] as shown. Secure with and 1 x right rails (CR) to panel [4] as shown.Tighten with a screwdriver. 12x screws (E), Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 5 Attach 2 x left rails (DL) and 2 x right rails (DR) as shown. Secure with Lift up assembled frame as shown. Attach panel {4} to assembled frame as shown, 4x screws (E). Tighten with a screwdriver. secure with 2 x dowels {C} and 2 x screws{D}. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 6 Attach panel {2} and {3} to assembled frames together as shown and secure with Attach panel {6} to assembled frames together as shown and secure with 4x 8 x nuts (B) and 4x dowels {C}. Tighten with a screwdriver. dowels {C} and 4x screws {D}. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 7 Avoca Console Table Attach 6 x nuts (B) and 6 x dowels {C} as shown. Tighten with a screwdriver. Attach assembled frame as shown and secure with 11x nuts{B}. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 8 Avoca Console Table Slide panel {10} into position as shown. Attach panel {1} as shown, secure with 6 x nuts(B) and 6 x dowels {C}. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 9 Avoca Console Table Attach 8 x braket {G} as shown and secure with8 x screws (F). Tighten with Attach 2 x screws and 2 x plug {M} to the wall. Tighten with a screwdriver. a screwdriver. mocka.co.nz I mocka.com.au I...
  • Page 10 Avoca Console Table Slide assembled drawer into position as shown. You’re done. Enjoy it! mocka.co.nz I mocka.com.au I...