Table of Contents
Advertisement
RX-777VBK
RX-777VSBK
RX-777VLBK
1-12 (No. 20055)
How to memorize
1
2
4
ERROR
12
USE LEARN
co
=
=o
a
—_
Select 1 or 2.
Set to LEARN.
Set the remote control
Check that the indi-
While it is blinking,
unit facing toward the
cator is blinking.
press the required
RM-SR777.
button. When the
(Refer to Fig. 20)
SEND/LEARN indica-
tor lights continuously,
the operation is com-
plete.
How to operate
t Check that the
indicator
goes out.
To memorize other
Set to USE.
Select 1 or 2. |. Press the required
functions, repeat steps
button.
4 and 5. (After check-
ing that the indicator
has gone out.)
CAUTION:
{f two or more of @ the learning buttons in which the functions have already been programmed are pressed simultaneously,
there will be no operation.
Example: After programming the REC key function into
@ "'A"', and the PLAY key function into @ "B", if buttons "A" and
"B' are pressed simultaneously, recording wilt not start.
When programming a function requiring two buttons to be pressed at the same time, such as REC + PLAY, or REC + PAUSE,
press the two buttons simultaneously in Step 5 to store the two functions in one of the @ learning buttons.
@ When programming two or more functions into one button, pay special attention during the operation in Step 7-3. If PLAY
functions are programmed, the contents of the recorded tape will be erased when the button is pressed.
Indicator lighting
ia a : Blinks
"¢ z a: : Lights continuously
(7) : Does not light
7
Button on
Button on other
SEND/LEARN
indi
Award
|
Button in which no function has been memorized
Button in which a function has been memorized
While memorizing a setting
Memorizing compiete
Memorizing incompiete
Incorrect button is pressed
How to use the function seals and template {Fig. 21}
The function identification seals and the template are provided
for use with the RM-SR777.
Use them referring to Fig. 21, as requied.
Fig. 21
Advertisement
Table of Contents
