Table of Contents
Advertisement
RX-777VBK
RX-777VSBK
RX-777VLBK
< Examples 1 >
5: Press
[5] .
10: Press [10] .
17:
Press
[+10] once, then press
[7
20: Press
[+10] once, then press [10] .
25: Press
[+10] twice, then press [5] .
TV/VCR 1: After pressing the @ TV CH or @ VCR 1
button, select the required channel
using buttons
(4) to [9
and
[0
Depending
on the VCR
or TV used, it may be
necessary to press the
[0] button first to select a one-digit
number. (See Ex. 2)
Note:
©
For details of operation, refer to the instruction book of
the VCR or TV.
< Examples 2 >
4: Press
{4] . Or, press [0] then
[4] .
13: Press 4] , then
(3) .
@ SEA SOURCE
Press this button to listen to the source with S.€.A.
com-
pensation.
When
the
SEA
SOURCE
button
is pressed,
"ON"
is shown and the "SOURCE"
indicator lights; when
it is pressed again, OFF'
is shown and "SOURCE"
goes
out.
@ SURROUND ON/OFF
Press
this button
to switch
the SURROUND
function
"ON" and "OFF".
When the SURROUND ON/OFF button
is pressed
once,
"ON"
is shown
and
"DIGITAL
SUR-
ROUND"
indicator lights in the display; when it is pressed
again, "OFF"
is shown and "DIGITAL SURROUND"
goes
out.
@ PRESET CHANNEL (&) , &))
When
the FM, AM.
TV CH or VCR
1 button has been
pressed;
preset stations or TV channels can be selected by
using these buttons to scan the available stations or chan
nels in either direction.
@ PHONO
PHONO
([®]): Press this button to switch the source to
"PHONO" and to start playing a record.
STOP ( (@]): Press this button to stop playing the record
Note:
@ When the [©] or [a] button is pressed, the correspond-
ing symbol is shown in the display.
@cp
CD ( (&]): Press this button to switch the source to "CD"
and to start playing a compact disc
STOP ( (J): Press this button to stop playing the com-
pact disc.
AUTO SEARCH:
( (hea) ): Press this button to move the pickup back to the
beginning of the current
tune.
Each
time
the button
is
pressed, the pickup will skip to the beginning of the previ-
ous tune. Keeping this button pressed causes the pickup to
skip back continuously.
{ (Bet) ): Press this button to move the pickup to the begin-
ning of the next tune.
Each time this button is pressed, the
pickup
moves
forward
by one
tune.
Keeping
this button
pressed causes the pickup to skip forward continuously
10 KEY: Press this button to use the @ 10-KEY buttons
to select the CD track No
t
1-10 (No, 20055)
Note:
@ When the (>), (a), ies) or >a button is pressed, the
corresponding symbol is shown in the display.
@ TAPE 1
TAPE 1 ( (®]): Press this button to switch the source to
"TAPE
1" and to start playing a tape in the TAPE
1 cas-
sette deck.
STOP ( [2] ): Press this button to stop the cassette deck.
MUSIC SCAN:
{ [ke] ): Press this button to select the tune by fast-winding
the tape from right to left.
(
): Press this button to select the tune by fast-winding
the tape from left to right
DIRECTION ( [#1®]}: Press this button to change the direc-
tion of tape travel.
Note:
@ When the (>),
(a), 4) or Be4 button is pressed, the
corresponding symbo! is shown in the display.
@ SURROUND
For the surround sound effect, first press @ SURROUND
ON/OFF
button to activate surround sound circuit, then
use these buttons.
({DELAY)):
Each time this button is pressed, the delay
time setting is changed in the order C172 > 35.
([MODE}): Each time this button is pressed, the surround
mode
is changed
in the ordereDOLBY
SURROUND
>
HALL
> STADIUM35
The display shows #DOLBY"
> "HALL"
> "STDUM;
in order.
~~
REAR LEVEL (©), 4): Adjust the relative volume of the
rear speakers with these buttons, Press the [+] button to in-
crease the volume, and press the [] button decrease it
Note:
@ Setting using these buttons will be shown in the display,
in the same way as when operating the front panel con-
trols. For details, refer to the description of the front
panel.
@ TAPE 2
Press this button to listen to the source connected to the
TAPE 2 terminals, and press it again to disengage the source
Note:
© The operating indications "ON" or "OFF" will be
shown in the display.
@ DAT
DAT ( [© ]): Press this button to start a digital audio tape.
STOP ( (1 }): Press this button to stop a digital audio tape
AUTO
SERACH:
{ f¥#4)): Press this button to select the beginning of the
corrent tune
( Pea ): Press this button to select the beginning of the next
tune
10-KEY: Press this button to use the @ 10-KEY buttons
to select a DAT track.
Notes:
© Connect a DAT deck to the TAPE 2 terminals of the
receiver.
©@ When operating the DAT deck, press @ TAPE 2 button
first, then press @
DAT operation buttons, or CON-
TROL DAT buttons (@, @ ).
@ When the
(©)
, (8), [64 or [P>@ button is pressed, the
corresponding symbol is shown in the display.
@ The
[e@ and
[i buttons of this unit have the same
function as the
[#4] and
[4]
buttons on the DAT deck.
@ CONTROL
VCR:
Press this button to operate the VCR connected to
the VCR 1 or 2 terminals.
TAPE
1: Press this button
to operate
the cassette deck
connected to the TAPE 1 terminals.
DAT:
Press this button to operate the digital audio tape
deck connected to the TAPE 2 terminals.
@ TAPE 1/VCR/DAT CONTROL
PAUSE/STILL
([1]): Press this button to pause during
playback or recording. To release, press the PLAY button
STOP ( (J): Press this button to stop operation.
REC (([0]): Press the PLAY button while pressing this
button to start recording.
When TAPE 1 or DAT is selected, the "DAT/TAPE
REC"
indicator lights for about 5 seconds.
{ [#4] }: For a cassette deck or DAT deck:
Press this button
to quickty wind the tape from right to left.
For a VCR:
Press this button to set from the stop mode to
the rewind
mode.
During playback,
press this button
for
high-speed
playback
in the
reverse
direction
(Shuttle
search).
PLAY ( (#1 ): Press this button to play a tape.
( [b®]): For a cassette deck or DAT deck: Press this butten
to quickly wind the tape from left to right
For a VCR:
Press this button
to transfer from the stop
mode to the fast-forward mode. During playback, press this
button
for high-speed
playback
in the forward direction
(Shuttle search).
Note:
© The symbols corresponding to the buttons (i), [a],
[#4] and [6] will be shown in the display. They are
not shown in the case of a VCR.
@ MUTE
Press this button to instantly mute the sound. To return the
volume to its original level, press this button again, or press
the BALANCE or VOLUME button.
Note:
© The operating indications of VOL +" or VOL "-" and
"MUTE", "OFF" will be shown in the display.
@ voLuME{ ©), 4)
Press the
button to increase the volume and the E]
button to decrease it.
Advertisement
Table of Contents
