Faqs - Huawei OptiXstar K153-10 Quick Start Manual

Huawei OptiXstar K153-10
Quick Start
How to set up a network?
In the network where the Slave FTTR is connected to the FTTR, the network
settings of the Master FTTR are synchronized. No further configuration is required.
How to restore the factory settings of the device?
Press and hold the Reset button of the device for more than 2 seconds using a
needle, and release the button after the indicator turns off. After the device
restarts and the red indicator turns on, the factory settings are restored.
How to change the Wi-Fi name and password of the device?
For the FTTR all-optical Wi-Fi solution, you are advised to change the Wi-Fi name
and password on the Master FTTR. The Slave FTTR automatically synchronizes the
modification.
How do I log in to the web page of the device in an FTTR network?
After the Slave FTTR is connected to the FTTR network, the FTTR network
automatically assigns an IP address to the device. The device can be accessed
through this IP address.
How Can I Retrieve My Login Password?
1.
Issue 01 (2023-04-28)
NO TE
After the Slave FTTR is restored to factory settings, connect it to the Master FTTR. The
device automatically synchronizes the configuration of the Master FTTR. The Slave FTTR
does not need to be configured.
NO TE
You can view the IP address on the Master FTTR or NCE. The login password is the same as
that on the Master FTTR.
Restore the factory settings of the Master FTTR. The Slave FTTR automatically
synchronizes the modification.
Press and hold the Reset button of the Master FTTR for more than 10 seconds
using a needle, and release the button after the indicator turns off. After the
Copyright © Huawei Technologies Co., Ltd.

5 FAQs

5
FAQs
15