Clamped In A Socket Panel - Huawei OptiXstar K153-10 Quick Start Manual

Huawei OptiXstar K153-10
Quick Start

2.2 Clamped in a socket panel

1. It is recommended that the operation be performed by an engineer with an
2. Before the installation, disconnect the power supply.
Step 1 Remove the cover of a socket panel and loosen the screws. Open the folding
bracket, clamp it behind the socket panel, and tighten the screws to secure the
cover.
You only need to loosen the screws on the panel, and do not need to remove the
screws.
Issue 01 (2023-04-28)
WARNING
electrician certificate.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
2 Placing the Device
5