Step 2: Setting Up The Remote Commander - Sony Trinitron KV-27S20 Operating Instructions Manual

Step 2: Setting up
the remote
commander
Inserting batteries
Insert two size AA (R6) batteries (supplied) by
matching the + and — on the battery to the diagram
inside the battery compartment.
Notes
e Under normal conditions, batteries will last up to six months.
If the remote commander does not operate properly or the
indicators of the buttons on the remote commander do not
light up, the batteries may be worn out. When replacing
batteries, replace both of them with new ones.
* Do not mix old batteries with new ones or mix different types
of batteries together.
« If the electrolyte inside the battery should leak, wipe the
contaminated area of the battery compartment with a cloth and
replace the old batteries with new ones. To prevent the
electrolyte from leaking, remove the batteries when you don't
plan to use the remote commander for a long period of time.
* Do not handle the remote commander roughly. Do not drop it,
step on it or let it get wet.
¢ Do not place the remote commander in direct sunlight, near a
heater, or where the humidity is high.
Ss eS Re TT aT
Getting to know buttons on the
remote commander
Names of buttons on the remote commander are
indicated in different colors to represent the available
functions.
Button color
Transparent ....... TV/VCR/DBS/Cable box function
(light up) buttons. Press the appropriate
function button first to change the
remote commander's function.
Geen oo. Buttons relevant to power operations.
Label color
White ss .cccat TV/VCR/DBS/Cable box operation
buttons.
Blue oo... DBS operation buttons.
Green
Blue
Transparent
Blue Blue
Getting Started 11