Sony Trinitron KV-27S20 Operating Instructions Manual page 10

ry
Connecting two VCRs for tape editing using MONITOR OUT
@ KV-27V20/29V20M only
MONITOR OUT allows you to record a program that is
on the screen.
VCR (for playback)
wa
=
VMC-810S/820S
(not supplied)
The above type of connection should only be used
when you connect from the line input of one VCR, and
from the line output of a second VCR.
Notes
¢ Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
e You can use the S video jack to connect a VCR for playback
and the composite video jack to connect a VCR for recording.
10 _ | Getting Started
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
(Rear of TV)
VCR (for recording)
r¥Yit
VMC-810S/820S
(not supplied)
When connecting a single VCR to the TV, do not connect the
MONITOR OUT jacks at the rear of the TV to the VCR's line
input, while at the same time connecting from the TV's VIDEO
IN jacks to the VCR's line output, as shown below.
(Rear of TV)