Advertisement
SATA Support
If Last Boot HDD Only, Only last boot HDD device will be available in post. If all SATA devices, all
SATA devices will be available in OS and post.
Options: All Sata Devices (Default) / Last Boot HDD Only
VGA Support
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.
EFI driver will still be installed with EFI OS.
Options: EFI Driver (Default) / Auto
USB Support
If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, USB Mass
Storage and specific USB port/device will NOT be available before OS boot. If Enabled, all USB
devices will be available in OS and Post.
Options: Partial Initial (Default) / Disabled / Full Initial
PS2 Devices Support
If Disabled, PS2 devices will be skipped.
Options: Enabled (Default) / Disabled
Network Stack Driver Support
If Disabled, Network Stack Drivers will be skipped.
Options: Disabled (Default) / Enabled
Redirection Support
If disable, Redirection function will be disabled.
Options: Disabled (Default) / Enabled
BIOS Flash protection
While enabled, it can't flash write and flash erase by SMI.
Options: Enabled (Default) / Disabled
New Boot Option Policy
This item allows you to controls the placement of newly detected UEFI boot options.
Options: Default (Default) / Place First / Place Last
28 | 5. Boot Menu
Advertisement
