Advertisement
C-states Auto Demotion
This item configure C-State Auto Demotion.
Options: C1 (Default) Disabled
C-states Un-demotion
This item configure C-State Un-demotion.
Options: C1 (Default) / Disabled
Power Limit 1 Enable
This item enables or disables Power Limit 1.
Options: Disabled (Default) / Enabled
Power Limit 1 Clamp Mode
This item enables or disables Power Limit 1.
Options: Enabled (Default) / Disabled
Power Limit 1 Power
This item sets the Power Limit 1 in Watts. Auto will program Power Limit 1 based on silicon
default support value.
Options: Auto (Default)
Power Limit 1 Time Window
This item sets the Power Limit 1 Time Window Value in Seconds. Auto will program Power Limit
1 Time Window based on silicon default support value.
Options: Auto (Default)
Active Processor Cores
This item sets number of cores to enable in each processor package.
Options: All (Default) / 1 / 2 / 3 / 4 / 5
Intel (VMX) Virtualization Technology
This item enableds or disableds Intel Virtualization Technology. When enabled, a VMM can utilize
the additional hardware capabilities provided by Vanderpool Technology.
Options: Enabled (Default) / Disabled
VT-d
This item enableds or disableds CPU VT-d.
Options: Enabled (Default) / Disabled
Bi-directional PROCHOT
When a processor thermal sensor trips (either core), the PROCHOT# will be driven. If bi-direction
is enabled, external agents can drive PROCHOT# to throttle the processor.
Options: Enabled (Default) / Disabled
Thermal Monitor
This item enableds or disableds Thermal Monitor.
Options: Enabled (Default) / Disabled
Monitor Mwait
This item enableds or disableds Monitor Mwait.
Options: Auto (Default) / Enabled / Disabled
P-STATE Coordination
This item allows you to change P-STATE Coordination type.
Options: HW_ALL (Default) / SW_ALL / SW_ANY
12 | 2. Advanced Menu
Advertisement
