Table of Contents
Advertisement
9. TROUBLESHOOTING
ee
Power does not turn on.
Fuse is blown.
(No sound is produced.)
incorrect wiring.
Compact disc cannot be
Another compact disc is
loaded.
already loaded.
Sound skips or is noisy.
Compact disc is dirty.
Compact disc is heavily
scratched or warped.
Water droplets may form
on the internal fens when
the car is parked ina
humid place.
Sound is bad directly after
power is turned on.
Microprocessor has
malfunctioned due to
noise, etc.
Nothing happens when
buttons are pressed.
Display is not accurate.
OCP or source unit
connectors are dirty.
14
0RB4675/0RB3675/R0B4650/RDB365D
| Repiace with a fuse of the same
amperage. If the fuse blows again,
consult your store of purchase.
Consult your store of purchase.
Eject the compact disc before loading
the new one.
Clean the compact disc with a soft
cloth.
| Replace with a compact disc with no
scratches.
Let dry for about 1 hour with the
power on.
Turn off the power, then press the
DCP Release button [1] and remove
the DCP.
Press the reset button for about 2
seconds with a thin rod.
Reset button
Wipe the dirt off with a soft cloth
moistened with cleaning alcohol.
Advertisement
Table of Contents
