Table of Contents
Advertisement
Kopak CarousEL Stack Loader
Lets you project and edit up to forty 2 x 2-inch slides in card-
board or very thin plastic mounts (or up to thirty 110 slides in
2 x 2 adapters) without loading them into a tray.
Kopak Slide Clip (for Kopak CarouseL Stack Loader)
Makes handling stacks of slides easier than ever—no loose slides
to slip out of your hands!
Each clip holds up to 36 slides in
cardboard or plastic mounts up to .050 inch (1.27 mm) thick,
or up to 25 slides in 2 x 2 adapters for 110 slides. The label on
each clip provides space for slide identification.
A set of 12 clips provides compact,
low-cost storage for up
to 432 slides in an attractive bookshelf-type storage box.
Kopak 2 x 2 Adapter for 110 Slides
If you have slides that are in 30 x 30 mm mounts, snap each 110
slide into an adapter for projection with your CarouseL Projector.
Project the slides singly, in trays, or with the optional
KODAK
CarouseL Stack Loader. Adapters are supplied in boxes of 20.
Kopak Projection Lenses (3)
(Curved-field lenses for slides mounted in cardboard or other
non-glass mounts)
Kopak Projection EKTANAR C Lens, 102 mm f/2.8
Kopak Projection EKTANAR C Lens, 127 mm f/2.8
Kopak Projection EkTANAR C Zoom Lens, 102 to 152 mm
f/3.5
Kopak Projection Lenses (6)
Kopak Projection EKTANAR Lens, 214-inch f/3.5
(recommended only for 110 slides
in 2 x 2-inch mounts or adapters)
Kopak Projection EkTANarR Lens, 3-inch f/3.5
Kopak Projection EkTANAR Lens, 4-inch f/2.8
Kopak Projection EkTANAR Lens, 5-inch f/2.8
Kopak Projection ExTanon Lens, 7-inch f/3.5
Kopak Projection EkTANAR Zoom Lens, 4 to 6-inch f/3.5
15
Advertisement
Table of Contents
