Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
1. Press FUNCTION to select the frequency (AM
or FM) you want.
2. Select a station you want by pressing TUN.-/+
on the remote control or TUNE.-/+ on the front
panel.
Tuning in automatically
- Press TUN.-/+ or TUNE.-/+ for more than
0.5 second. Scanning stops when the unit
tunes in a station.
Tuning in manually
- Press TUN.-/+ or TUNE.-/+ briefly and
repeatedly.
3. Press PROGRAM/MEMO. A preset number will
flash on display window.
4. Press PRESET/FOLDER (
preset number you want.
5. Press PROGRAM/MEMO again.
The station is stored.
6. Repeat the steps from 1 (or 2) to 5 to store
other stations.
To delete all of the memorized stations
Press and hold PROGRAM/MEMO for two sec-
onds, "ERASE ALL" appears on display window
and then PROGRAM/MEMO again, the stations
are deleted.
For your reference
If all stations have already been entered, "FULL"
message will appear for a moment and then a
preset number will flash. To change the preset
number, follow the steps 4 - 5.
To recall presets
Press and hold PRESET/FOLDER (
the desired preset number appears or press it
repeatedly.
Listening to the Radio
1. Press FUNCTION to select the frequency (AM
or FM) you want.
The last received station is tuned in.
2. Press PRESET/FOLDER (
to select the preset station you want.
- Each time you press the button, the unit
tunes in one preset station at a time.
3. Adjust the volume by pressing VOLUME
) on the remote control [or rotating the
(
/
VOLUME control knob] repeatedly.
To listen to non-preset radio stations
Refer to the sections "Presetting the Radio
Stations" on the left.
To turn off the radio
Press POWER (
another function mode (CD, USB, AUX,
PORTABLE, TAPE).
For your reference
• If an FM program is noisy;
Press ST./MONO, then "STEREO" disappears
on display window. There will be no stereo
effect, but the reception will be improved. Press
ST./MONO again to restore the stereo effect.
• To improve reception;
Reposition the supplied antennas.
) to select the
/
PORTABLE Function
When you connect a portable music playing
device to the PORT. IN jack on this device by
using a 3.5mm mini stereo cable (not supplied),
you can hear the sound being outputted from the
portable device through the speaker.
Portable Device
) until
/
Headphone or Line out
1. Connect the PORT.IN jack on this device to a
headphone jack on another portable one by
using a cable.
2. Press FUNCTION repeatedly to select
PORTABLE function.
3. Start playing the connected portable device.
) repeatedly
/
4. Adjust the volume by using VOLUME.
Note:
The " 3.5mm mini stereo cable" is sold sepa-
rately.
) to turn the unit off or select
1 1 /] ]
PORT.IN
11
Advertisement
Table of Contents
