Table of Contents
Advertisement
Auto Function Selection
* |f you press PLAY/PAUSE (FII) on the remote
control during radio receiving or CASSETTE
play, CD will be operated automatically.
* |f you press TUNER on the front panel during
CD or CASSETTE play, radio function will be
operated.
Setting the Clock
1. Press CLOCK.
(If the clock requires setting, press and hold
CLOCK for more than 2 seconds.)
2. Select a 24 hour cycle or 12 hour cycle by
pressing PRESET (-)/(+).
3.
Press SET to confirm the selected hour
cycle.
4. Use PRESET (-)/(+) to set the correct hours.
5. Press SET.
6. Use PRESET (-)/(+) to set the correct
minutes.
7.
Press SET and the correct time is shown on
the display.
8. Press CLOCK at any time to display the time
for about 5 seconds.
Using the Sleep Function
When the sleep timer is used, the power is auto-
matically turned off after the specified time has
elapsed.
1. To specify the time delay before the power is
turned off, press SLEEP.
In the display window you see SLEEP
90
for about 5 seconds. This means that the
system turns off automatically after 90
minutes.
Press SLEEP until the desired time is dis-
played.
Note: Each time the button is pressed the
time interval is reduced by 10 minutes. i.e.
80...70... etc.
2. To check the remaining time until the power
is turned off, press SLEEP while the sleep
function is active. The time remaining is dis-
played for about 5 seconds.
ote
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
3. To cancel the sleep timer mode, press the
SLEEP button repeatedly until "SLEEP 10"
appears, and then press SLEEP once again
while "SLEEP 10" indicator is displayed.
=
© =
©
he
o
Q
o
Advertisement
Table of Contents
