Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Operation
Basic Operation
Headphone jack
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will switch
off the speakers.
MUTE
Press MUTE to temporarily stop the sound.
The "
" indicator flashes on display window.
To cancel it, press VOLUME (
again.
DIMMER
Pressing DIMMER one time darkens or bright-
ens the display window.
RANDOM
Press RANDOM, play tracks/files you can in a
random order or cancel it.
DEMO
Press Z CD OPEN in power off state to demon-
strate the function on display window. To cancel
it, press POWER (
) or Z CD OPEN again.
1 1 /] ]
Sound Adjustment
XTS Pro
The function creates the optimum sound for you
to play of the original sound. Each time you
press XTS Pro, "XTS -- PRO ON" or "XTS --
PRO OFF" is displayed in turn.
Note:
The XTS Pro function will not be operated when
a headphone has been connected.
XDSS
(eXtreme Dynamic Sound System)
Press XDSS plus to reinforce treble, bass and
the surround effect.
The "XDSS ON" or "NORMAL" indicator lights.
MP3 Optimizer
This function is optimized for compressible MP3
files so that it improves the bass sound. Each
time you press XDSS plus the setting changes
in the following order.
XDSS ON → MP3 -- OPT ON → NORMAL
EQUALIZER Effect
You can choose 7 fixed sound impressions and
adjust the BASS, MIDDLE and TREBLE.
- You can select a desired sound mode by using
EQ master.
NORMAL
JAZZ
- Press EQ master to select USER EQ.
) or MUTE
/
1. To enter the "USER EQ" setting mode, press
SET while "USER EQ" is displayed.
2. In USER EQ mode, press bB/ [] PLAY or x x
STOP on the front panel repeatedly. Then you
can select the sound effect you want among
BASS, MIDDLE or TREBLE.
3. When a menu you select is displayed, press
bb/BB on the front panel to set the sound
level MIN, -4 ~ +4, MAX steps.
- Then the sound level is displayed for a
moment and the setting completed.
4. Repeat the steps from 2 to 3 to set other
sound effect.
5. Press SET.
Advanced Setting
Setting the Clock
1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour
time system by pressing bb/BB on the front
panel.
v v v v v v
(12HR)
3. Press SET to confirm the selected hour time
system.
4. Press bb/BB on the front panel to set the
correct hours then press SET.
5. Press bb/BB on the front panel to set the
correct minutes press SET.
6. Press CLOCK at any time, to display the time
for about 5 seconds.
Note:
If you want to reset the clock, press and hold
CLOCK for more than 2 seconds.
USER EQ
POP
CLASSIC
→
→
→
DRAMA
ROCK
or
(24HR)
7
Advertisement
Table of Contents
