Advertisement
GENERAL BEST PRACTICES FOR ASSEMBLY:
Read all instructions before starting
Clear a flat covered space to begin
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
WARNINGS:
Use the correct screws as indicated. All screws should be hand tightened until the complete piece is assembled ( This will make
the assembly process much easier ). Once the piece is fully assembled, then go back and tighten all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the
product construction. Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires. Some parts may contain sharp edges.
When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury
and damage to the product. Please read all instructions before assembly and use.
The chair is not to be used for standing purposes. Use on even surfaces only.
The chair is used at weight of 110lbs (50kg). Improper use of this product or failure to use as directed may result in injury.
Not intended for commercial use.
MAINTENANCE:
Before using, clean the product completely with a soft dry towel. Screws will be loosened over a period of usage, please check
the screws occasionally and re-tighten if necessary.
Advertisement
