Advertisement
GENERAL BEST PRACTICES FOR ASSEMBLY:
Read all instructions before starting
Clear a flat covered space to assemble
We recommend two people for assembly.
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its number in the package
Helpful hints provided along the way
Note: This product includes a tube of glue. The glue is not required for
assembly but can help the products durability and structural soundness and
extend the life of the product. Please follow these instructions to use the
glue. It is important to note that if glue is used for assembly, the product
will no longer have the ability to be disassembled.
1. Place a small dab of glue into the hole just prior to placing the wood
dowel into position. DO NOT fill the hole with glue.
2. Wipe up any excess glue up with a damp paper towel.
3. Repeat this for all holes where a wood dowel is inserted.
Hint: If to much glue is placed into a hole, Q-tip can be used to remove
excess glue and transfer it the next hole. Be certain to wipe up any excess
glue immediately with a damp paper towel.
Regularly check hardware and tighten if necessary
CARE AND CLEANING:
Clean periodically by wiping the product with a soft clean cloth
DO NOT use abrasive chemicals for cleaning.
MAINTENANCE:
Advertisement
