Advertisement
AttacheachExtension L eg(63)withtwo1"TekScrews
(39)anda BasePad(57)as shown. A ttachthe lower
TekScrew,withoutthe BasePad,first.
Attach twomoreBasePads(57)tothebaseofthe
Uprights (69)withtwo1"TekScrews (39).Note: O nere-
placement BasePadmaybeincluded. If a BasePadbe-
comes wornandneeds to bereplaced, usethereplace-
mentBasePad.
Attach thetwoWheels (66)withtwo2"Bolts(64)and
twoWheel N uts(32)asshown. D onot overtightenthe
Bolts;theWheels shouldbeabletospinfreely.
Withthehelpofanother p erson, c arefully raisethe
Uprights (69)tothevertical position.
Seestep2.Tighten thetwoHandrail Bolts(37).
64
.... _39
69
66
64
Hold the Console Base (47) near the Left Handrail (71).
Attach the end of the ground wire on the Console Base
to the indicated small hole in the Left Handrail with the
Silver Ground Screw (75).
Small
71
47
Ground
Wire
Touch the Right Handrail (72) to discharge any static.
Press the end of the Upright Wire (42) into the socket in the
bottom of the Console Base (47). The connector
should
slide easily into the socket and snap into place. If the
connector does not slide easily and snap into place, turn
the connector and then insert it.
42
47
8
Advertisement
