Lan; Ipv4 - D-Link DSL-2640U User Manual
Wireless adsl2+ router with ethernet wan support
Hide thumbs
Also See for DSL-2640U:
- User manual (149 pages) ,
- Quick installation manual (40 pages) ,
- User manual (86 pages)
Table of Contents
Advertisement
DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
LAN
To configure the router's local interface, go to the Connections Setup / LAN page.
IPv4
Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 74. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Parameter
IP address
Subnet mask
Device domain name
Figure 75. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Local IP Address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.1.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
The name of the device attached to its IP address in the local subnet.
Page 95 of 174
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
