Advertisement
Page 5 of 35
20) Company logo.
21) Rear by-pass lever positions.
All the instructions and procedures summarised by the pictograms are explained in detail in subsequent
sections of this manual.
The CE plate is placed on the spring support plate, under the seat (see figure above).
Content:
- Manufacturer name and address
- Machine type
- Machine model
- Serial number
- Engine net power
- Machine dry mass
- Year of production
- BEFORE using the machine, IT IS ESSENTIAL to read and understand this manual and the
attached engine manufacturer manual. The FOX ride-on flail mower is a professional machine: therefore, it
is important to ask for clarifications also in case of apparently simple doubts. Your local retailer or the
manufacturer will be available to provide the needed answers.
- Have the main control elements and the specific operations of the machine explained by the qualified
Meccanica Benassi
personnel of the
- It is strictly forbidden to tamper in any way with the control elements or other technical characteristics of
this machine.
- It is strictly forbidden to intervene on or modify in any way the engine characteristics, especially its
maximum RPMs (this can cause irreversible damage to the hydrostatic transmission).
- It is strictly forbidden to place loads on the seat or tamper in any other way with the weight sensor
positioned inside the seat.
- With the engine on, it is strictly forbidden to do anything other than the mowing operations carried out by
the operator on the driver seat.
2b – CE MARKING
3a – GENERAL SAFETY INSTRUCTIONS
sales network.
35451510IT - FOX MINI 85-2WD User and Maintenance Manual
Advertisement
