Advertisement
Page 25 of 35
7d – CHECKS AND MAINTENANCE OPERATIONS TO BE CARRIED OUT
While the checks described in the previous paragraph must be carried out by the operator, the following
maintenance operations, scheduled at regular intervals, must be performed by a
authorised workshop. According to the type of use, establish the regularity of service checks together with
your usual retailer.
Report the interventions carried out on the
Every 50 hours
- Engine oil full replacement => see Engine manual
- Complete replacement of the set of blades and related bolts
- Grease the rotor support bearings: see explanation in the following paragraphs.
- Belt check and adjustment, contact
- Electromagnetic clutch control and rotor stop times: blades must stop within 7 seconds of disconnecting
the PTO button.
- Check, greasing, possible adjustment of pedal control elements, steering wheel tie rods, wired control
elements.
- Check of the oil level in the bevel gearbox, see explanation in the following paragraphs.
- Check and possible tightening of all the machine bolts.
Every 100 hours
- Engine oil filter check
- Engine air filter replacement
Every 150 hours
- Replace the rotor support bearings.
Every 500 hours
- Total replacement of the bevel gearbox oil, see explanation in the following paragraphs.
Once a year
- Replace the spark plugs
When needed
- Battery replacement:
► During maintenance, keep metal objects away from the poles.
► Use original batteries only. They are sealed, dry-charged and they have no acid leaks.
► Follow the instructions described in the battery manufacturer's manual supplied with this
machine manual.
When the battery is disconnected (in order to install another one of the same type):
- Disconnect the negative black pole (-)
- Disconnect the positive red pole (+)
REGULAR INTERVALS
Service Sheet of CHAP. 11
Meccanica Benassi
for further details.
Meccanica Benassi
.
35451510IT - FOX MINI 85-2WD User and Maintenance Manual
AT
Advertisement
