Table of Contents
Advertisement
Restoring the Factory Settings
(Initialization)
If you wish to restore the GX-700 to the factory settings, use
the following procedure (Initialization). You can choose to
initialize all settings, or initialize only a specified area of data,
such as Patch data in the user area or system settings such as
Utility data.
The following types of data can be initialized.
Display Shows|
Settings initialized |...
| System | Parameters accessed through the UTILITY Mode |
| Patch # 1 | Settings for Patch Number i
|
| Patch 2 | Settings for Patch Number2_
|
{
Б
|
:
Н
Patch # 99 | Settings for Patch Number 99
Patch #100 || Settings for Patch Number 100
(Procedure)
Mt.
co NPEEEETETENSERg [ER
|
T
5
2,3,4 1,(6)
Press [TUNER/UTILITY].
The Play button indicator will go dark, and the tuner page
will appear in the display.
Use PARAMETER [4] 9») to access the following param-
eter (FACTORY INITIALIZE) in the display.
FACT INITCWRITE]
SYSTEM-
Ри1884
Starting Point
Ending Point
Use PARAMETER [a] [>] to move the cursor to "start," and
use the VALUE knob to display the first data to be initialized.
Use PARAMETER |" [b>] to move the cursor to "end," and
use the VALUE knob to display the last data to be initialized.
Press [WRITE], and the data of the specified area will be
initialized.
When initialization is complete, the previous page will
reappear.
Press [PLAY] or [TUNER/UTILITY] to end the procedure.
(You will return to the Play page.)
Section 5 Appendix — 67
Advertisement
Table of Contents
