Pref (Preference); Loop; Usb; Pdl Calibration (Pedal Calibration) - Boss GT-1B Parameter Manual / Sound List

MENU

PREF (PREFERENCE)

Here you can specify whether settings for the type of connected
amp and preamp, control pedal, expression pedal, etc. will be
independent for each patch, or whether the same settings will be
shared by all patches.
Parameter Value
EXP 1 PATCH, SYSTEM
CTL 1 PATCH, SYSTEM
EXP SW PATCH, SYSTEM
DOWN PATCH, SYSTEM
UP PATCH, SYSTEM
EXP 2 PATCH, SYSTEM
CTL 2 PATCH, SYSTEM
CTL 3 PATCH, SYSTEM

LOOP

This specifies the level of loop playback.
Parameter Value
LOOP 1–120
26
Explanation
If this is set to PATCH, different settings can
be made independently for each patch. If
this is set to SYSTEM, the same settings will
be shared by all patches.
* Here, even if a CTL/EXP pedal that has
been set to SYSTEM is set to ASSIGN
SOURCE (p. 18) , that setting will be
ignored.
Explanation
Specifies the phrase playback volume.

USB

Here you can make USB-related settings for when the GT-1B is
connected to a computer via USB.
USB audio flow
GT-1B outputs the effect sound, and the return from the computer is mixed
with your bass performance at the final stage.
GT-1B
USB IN
EFFECT OUT
LEVEL
INPUT
Effect Chain
Parameter Value Explanation
Adjusts the level of the audio input from the
MIX LEVEL 0–200% computer. At this time, the audio input from the
computer is mixed at the final stage of the GT-1B.
EFX OUT (EFFECT
Adjusts the level at which the sound processed by
0–200%
OUT LEVEL) the effects of the GT-1B is output to the computer.
Switches whether the sound of the GT-1B is output to the
PHONES jack or the OUTPUT jacks.
* This setting cannot be saved. It will be ON when the unit
is powered-on.
Turn this off if the audio data is being passed "thru"
DIRECT MON within the computer.
OFF
(DIRECT MONITOR)
In this case, you won't hear sound unless the
computer is set to "thru. "
The sound of the GT-1B is output directly. Turn this
on if you're using the GT-1B on its own without
ON
connecting it to a computer. (If you turn this off,
only the sound being input via USB is output.)

PDL CALIBRATION (PEDAL CALIBRATION)

You can readjust the expression pedal so that it will operate
optimally.
Parameter Value
THRESHOLD 1–16

F.RESET (FACTORY RESET)

Initializes the GT-1B to its factory-set condition.
Parameter Value
SYSTEM
FROM
U01–U99
SYSTEM
TO
U01–U99
USB OUT OUTPUT
MIX
LEVEL
Explanation
Adjusts the sensitivity at which the EXP
PEDAL SW will respond.
Explanation
System parameter settings
Settings for Patch Number U01 through U99
System parameter settings
Settings for Patch Number U01 through U99