Returning Settings To Their Factory Defaults - Boss CE-20 Owner's Manual

Returning Settings to Their Factory Defaults

You can restore the memories (1–4), pedal mode settings, and the direct sound
mute settings to their original factory values.
Memory Settings
Pedal Mode (p. 11–12)
Direct Sound ON/OFF (p. 22)
MEMORY Number Indication (p. 23)
Carrying out the following procedure completely clears the content
currently stored in the memories (1–4).
1. Switch off the power.
• When running on battery power:
Disconnect the connection plug from the INPUT R (MONO) jack.
• When running on power from an AC adaptor:
Disconnect the plug from the AC ADAPTOR jack.
2. While holding down the WRITE button, switch on the power.
• When running on battery power:
Insert the connection plug into the INPUT R (MONO) jack.
• When running on power from an AC adaptor:
Insert the AC adaptor plug into the AC ADAPTOR jack.
When you release the button, the MEMORY Number indicators (1–4) flash.
3. Press the WRITE button.
After the MEMORY Number indicators (1–4) begin flashing rapidly, the setting is
stored in memory and the unit returns to its ordinary state.
* To cancel the setting change and the unit returns to its ordinary state, then before you
press the WRITE button, operate the MANUAL/MEMORY or EFFECT ON/OFF pedal.
24
Memory 1 (p. 26)
Memory 2 (p. 26)
Memory 3 (p. 27)
Memory 4 (p. 28)
SUPER RICH
BASS STANDARD
DEEP CHORUS
CE-1
1
ON
Lighting Pattern 1