Reordering Scenes
You can move the scenes around and reorder
them.
1. Make sure the SET function at the
bottom of the screen Is highlighted.
• If not, use the FlexiZone controller to move
down the screen and then across to SET.
2. Move up or down the screen with the
FlexiZone controller to the scene you
want to move.
3. Move the FlexiZone controller to the left
once to highlight the entire line.
[EDIT TOTAL 0:19 47
STOP I
CUT-IN
CUT-OUT
0 : 4 0 : 0 3
!!► 0:01 : 20t 0:04: : 05
0:15 034 0:18 20
0:20 154 0:30 32
0:35 4 74 0 : 38 15
aU DELETE PREVIEW START CLEAR
4. Move the FlexiZone controller up or
down to where you want it.
• The line of data moves with it.
• Move the FlexiZone controller to the right once
when the scene is correctly positioned.
5. Repeat as necessary with the other
scenes until they are in the order you
want them.