Table of Contents
Advertisement
6. To unlock outriggers, push downward on the counter-
weight lever indicated by arrow (Figure 19).
Figure 19. Outriggers (Released)
7. Grab hold of outrigger, pull upward, push down and
place in stow position (Figure 20).
Figure 20. Outriggers (Stow Position)
GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 21
8. Press down on the top of the brake pedal (Figure 22)
STOW
Figure 21. Parking Brake (Released Position)
POSITION
STORAGE
1. Wipe dirt or foreign matter that may have accumulated
2. Avoid storing the GB43LED in areas that can be
3. Place the GB43LED in a clean dry location away from
and hold, then release. This action will disengage
the brake mechanism and allow the GB43LED to be
moved.
on the GB43LED during operation. Use a mild detergent
to clean the unit. DO NOT spray the engine with water.
exposed to rain, harsh elements, and high humidity.
dirt and debris.
STORAGE
Advertisement
Table of Contents
