Advertisement
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
For rectangular trim plates: M1-4300, M1-4301,
M2-4300, M2-4301, X1-1998, X1-1999
wall surface
For rectangular trim plates: M1-4300, M1-4301,
M2-4300, M2-4301, X1-1998, X1-1999
135~140mm
1
Position valve into the wall as shown.
2
Connect the valve to the water pipes.
3
Cut a hole in the wall surface for fitting the trim kit. The hole dimension is as shown in figure 3.
4
Throw away the protective cap only when the building construction is completed and you are
ready to fit the trim kit.
REMOVE CAP ONLY, KEEP THE REST OF THE MUD GUARD AS IT IS NEEDED TO HOLD THE TRIM
FIXING SCREWS.
75~100mm
HOT WATER - IN
1
3
Steps 1-4
mixed water out
COLD WATER - IN
REMOVE CAP ONLY, KEEP
THE REST OF THE MUD GUARD
AS IT IS NEEDED TO HOLD THE
TRIM FIXING SCREWS.
2
4
4
Advertisement
