TRONE Aquatina III A3ETBCERN-12.WH Installation Manual

Hide thumbs Also See for Aquatina III A3ETBCERN-12.WH:

Advertisement

Quick Links

Aquatina III Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aquatina III A3ETBCERN-12.WH and is the answer not in the manual?

Questions and answers

Summary of Contents for TRONE Aquatina III A3ETBCERN-12.WH

  • Page 1 Aquatina III Installation Manual...
  • Page 2 INSTALLATION PREPARATION Before installation begins, please confirm that you have the materials indicated below: Included Main Unit Sealing Flange Remote Control Components Installation Manual Thank you for choosing our products. Please read the instructions carefully before installation and keep it available for future maintenance or reference. Angle Valve Installation Manual...
  • Page 3 Recommended Tools Pencil Masking or Tape measure 7/16” ratchet box Carpenter’s painters tape or ruler wrench or deep socket square or other ratchet wrench straight edge Precautions Before Installation Please give enough allowance for the installation. Ensure that there is room enough for the opening and closing of the bathroom door.
  • Page 4 Installation Requirements Minimum static water pressure: 20 psi Maximum static water pressure: 80psi Minimum water flow: 1 Gallon every 10 seconds 115 V power GFCI receptacle within 4’ Recommended Water & Power Placement #1 INSTALLING THE WATER VALVE Option #1: Copper Stubbed Out of Wall (easiest method) 1.
  • Page 5 4. Crimp pex swivel female adapter onto pex. 5. Attach valve to adapter. Option #3: Use existing valve and supply lines (This method will reduce the water pressure/volume to the toilet and is not recommended unless one of the first two options cannot be achieved.) 1.
  • Page 6 5. Install the wax ring under the toilet. Wax Ring 6. Using two people, lift the toilet and align the marks on the toilet bowl with the cross marks on the ground. Also confirm the holes in the bottom of the bowl alight with the closet bolts. 7.
  • Page 7 #3 INSTALLING THE BATTERY 1. Carefully remove the cover of the battery case. 2. Install the battery and slide the cover back on the battery box. 3. Reinstall the toilet seat-lid assembly to complete the toilet installation. #4 CONNECT BRAIDED HOSE 1.
  • Page 8 Caulk Application Caulk the bottom edge of the toilet with a mildew-resistant caulk designed for indoor bathroom applications. This will help to keep the bowl in place and give the closet bolts added security and strength. Wait for 24 hours to dry. Remote Installation 1.

Table of Contents