Advertisement
Building-in instructions
If desired this washing machine can be
built-in to a run of kitchen units in place
of a unit 600mm wide and 600mm deep.
This will leave the integral worktop at a
height of 850mm which is compatible
with most modern units, however, if you
prefer, the machine can be inserted
beneath an existing worktop.
In this case, there must be at least
820mm between the floor and the
underside of the existing worktop and it
is necessary to replace the machine's
integral worktop with a protective metal
panel, available from your dealer as an
optional extra on application. To do this,
proceed as follows:
1
To remove the integral worktop, undo
;
Carefully position the protective metal
panel on top of the machine, and fix in
place by driving home the four screws
supplied with the panel.
27
Advertisement
